1. If the windshiel washer button is press and the motor can be heard is running, it might be due to insufficient washer fluid causing there is no response from the nozzle. Owner may refill the washer fluid first then check if the nozzle is spraying the fluid properly. 2. If the washer fluid level is sufficient and the motor can be heard running after the button is pressed but still there is no response from the nozzle, it might be the hose between reservoir tank and pump is clogged. If it is the nozzle being clogged, owner can use a needle or any tiny sharp edge item to dredge the nozzle. Besides, suggest owner to use a washer fluid with good quality because a bad quality washer fluid will produce water alkaline which will clogged the nozzle and hose. 3. if the motor is not running after the washer button is pressed, it might be the motor is faulty. A faulty motor could cause by various reasons such as open circuit between fuse box and washer motor, open circuit between washer button lead wire and motor, contolling switch lead wire open circuit or contact point damaged. Suggest owner to visit workshop for diagnose.