1 Answer:
  • jimmy woo
    The rear tape measurement (side towards the rear of the vehicle) minus the front tape measurement (side closest to the front of the vehicle) is the total toe of the axle. A larger measurement on the front side indicates toe out, and a larger measurement on the rear side indicates toe in.
Data Sources:
*
All content is shared, and reprinted from the Internet. If there is any infringement or error, please contact us to delete it. Email: feedback@wapcar.com
  • How do I adjust my rack and pinion toe?

    Adjust the toe by turning the inner tie rod on a rack and pinion steering system and by turning the adjusting sleeve on a parallelogram linkage system. To adjust the toe on a vehicle with a typical rack and pinion system, loosen the nut on the inner tie rod about a half-inch from the outer tie rod end.