1 Answer:
  • Irene yei
    The coolant reservoir is situated on the off side of the engine compartment, and is filled to the level mark with Mercedes-Benz coolant fluid, which is a combined coolant/anti-freeze/anti-corrosion fluid. Mercedes-Bens recommend that it be replaced every three(3) years on the 'A' Class.
Data Sources:
*
All content is shared, and reprinted from the Internet. If there is any infringement or error, please contact us to delete it. Email: feedback@wapcar.com
  • How do I add coolant to my Mercedes E350?

    How to Add Coolant: Mercedes-Benz E350 (2010-2016) Base 3.5L V6 Coupe (2 Door)
    1. Find Reservoir - Locate the coolant reservoir and clean it.
    2. Check Level - Determine the coolant level.
    3. Add Coolant - Determine coolant type and add fluid properly.
    4. Replace Cap - Secure the coolant reservoir cap.
  • How do you flush w204 coolant?

    To flush the system: close all the openings and fill the reservoir with distilled water. Run the motor with the heater on full for a few minutes. Then drain and repeat until the water runs out clear.
  • What does it mean top up coolant Mercedes?

    This indicates the engine cooling system is low on coolant and will need to be topped off. The system should be inspected for leaks to ensure there are no other issues causing the engine coolant level to drop.1 jun 2016
  • How do you top up the coolant on a Mercedes GLE?

    Part of a video titled Checking & Adding Engine Coolant to a Mercedes Benz C-Class 2012
    1:06
    5:15
    But before we fill it up I'm just gonna have a quick visual check under the bonnet just to see howMoreBut before we fill it up I'm just gonna have a quick visual check under the bonnet just to see how low we actually are so we need to pop the bonnet.