1 Answer:
  • מוחמד הייזל
    You do not need to replace all 4 rotors at the same time, but it is recommended to replace the rotors and pads as a set for each axle front or back at the same time. If the front brakes need to be replaced but the rear brakes are not worn out yet, then you do not need to replace the rear brakes.1 Nov 2016
Data Sources:
All content is shared, and reprinted from the Internet. If there is any infringement or error, please contact us to delete it. Email: feedback@wapcar.com
  • Do all Mercedes have Brake Assist?

    Part of a video titled Mercedes-Benz Active Braking Assist: Driving Assistance Package
    Active brake assist as part of the driving assistance package has additional benefits the speedMoreActive brake assist as part of the driving assistance package has additional benefits the speed thresholds are considerably higher than those of the standard system thanks to the fusion of radar.
  • Which car has the most HP?

    Some of the highest horsepower cars available are:
    • Koenigsegg Regera: 1,479hp.
    • Tesla Model S Plaid: 1,020hp.
    • Dodge Demon: 840hp.
    • Ferrari 812 Superfast: 800hp.
    • Rivian R1T: 800hp.
    • Lamborghini Aventador SVJ: 770hp.
    • Mclaren 765 LT: 765hp.
    • Porsche Taycan Turbo S: 761hp.
    13 Apr 2022
  • Are SRT brakes Brembo?

    There are two main types of high performance brakes used on Dodge/SRT vehicles. One set is the Brembo 4-piston high performance brakes with Brembo black calipers. This set of brakes is used on the two Dodge Challenger Scat Pack models and the Charger Scat Pack, which are all equipped with the 6.4L HEMI SRT V8 engine.22 Sept 2017
  • Do you have to replace rotors with pads on AMG?

    Brake rotors are replaced in pairs. If you choose front brake rotors, both front wheels will get new rotors. This service comes with brake pads. Unless brake pads were replaced recently, pads must be replaced while replacing the rotors.
  • How do you change brake pads on a Mercedes?

    1. Park the Mercedes-Benz on a level surface. ...
    2. Remove the metal clip using a flat head screwdriver. ...
    3. Locate the two bolts that secure the caliper on the bracket. ...
    4. Unplug the brake pad wear sensor.
    5. Remove the caliper from the bracket.
    6. Push the piston into the brake caliper using a brake pad spreader.

Used Cars For Sale

View More