1 Answer:
  • Loh Kun Yu
    0.5–1°
    For normal, modern cars typically feature a slightly negative camber angle is desired (0.5–1° to ensure a good balance and cornering grip, braking grip and tire wear.
Data Sources:
*
All content is shared, and reprinted from the Internet. If there is any infringement or error, please contact us to delete it. Email: feedback@wapcar.com
  • How do you check camber alignment?

    To check camber, make sure the vehicle is parked on level ground. If not, factor the ground slope into the camber reading. Then place a straight edge across the wheel (use the inner lip if the outer is nicked or uneven) and use an angle finder to reveal camber.
  • How do you camber a Miata?

    Part of a video titled -12 Degrees Of Camber | HOW TO STANCE A MIATA - YouTube
    0:02
    7:14
    It's very simple overall it's basically just replacing it the only thing is as once you're done itMoreIt's very simple overall it's basically just replacing it the only thing is as once you're done it actually kicks out the bottom of the whole spindle. And everything who gives you more camber.
  • Is positive camber good?

    ' Positive camber is for stability, while negative camber is common in high performance vehicles that require better cornering. Quick fact: While some positive or negative camber is good, too much of either is bad.
  • Can camber affect steering?

    Positive camber reduces steering effort and provides greater stability in a straight line. This makes it great for off-roading or agricultural vehicles, as turning can sometimes be more difficult in these cases.24 mar 2022
  • How is camber measured in steel?

    Camber is measured by placing a straight edge along the concave side of the sheet and measuring the maximum distance from the straight edge to the edge of the sheet (Figure 1).

Used Cars For Sale

View More