1 Answer:
  • CM Lim
    In case you need to reset your Subaru Eyesight system, put the car in park, and use the multi-control “i” buttons to select “i/set” on the LCD menu. Change the warning volume using the up and down toggle switches, then pull the i/set switch to finalize your selection.28 Apr 2022
Data Sources:
*
All content is shared, and reprinted from the Internet. If there is any infringement or error, please contact us to delete it. Email: feedback@wapcar.com
  • What speed does blind-spot monitoring work?

    Typically, blind-spot systems only work at speeds above 20 to 35-ish mph. This prevents false positives on city streets but tends to only make the tech useful at highway speeds. And as I mentioned, the audible alerts work only if you actually use your turn signal, which some people don't always use.20 Nov 2017
  • What is rear cross traffic collision avoidance assist?

    A Rear Cross-Traffic Collision Warning is an advanced driving assistance system that informs the driver if a vehicle is approaching from the left or right when the driver's vehicle is in reverse and is backing out of a parking space.
  • How do you turn on the blind spot detection on a crosstrek 2018?

    Part of a video titled Subaru Blind Spot Detection - YouTube
    0:50
    2:34
    Or on the right side of the car and there's sensors. All around the back of the bumper to detectMoreOr on the right side of the car and there's sensors. All around the back of the bumper to detect those cars behind you so you can actually turn this feature on and off in your subaru.
  • How do you activate lane assist on a BMW?

    Part of a video titled How to change the settings for Lane Change Warning – BMW How-To
    0:00
    1:53
    You can set the warning level of the lane change warning by selecting. Car settings driverMoreYou can set the warning level of the lane change warning by selecting. Car settings driver assistance safety and warnings lane change warning.
  • Do you have to check blind spot at traffic lights?

    In summary, it is not necessary to look at left blind spots at junctions if you have positioned correctly, but always look right and left before pulling out.

Used Cars For Sale

View More