1 Answer:
  • Andrew Teh
    Regular DOT 4 has a minimum Wet Boiling Point of 165 degrees Celsius, while the DOT 4+ spec is 180 degrees.21 Oct 2015
Data Sources:
*
All content is shared, and reprinted from the Internet. If there is any infringement or error, please contact us to delete it. Email: feedback@wapcar.com
  • Where do you put the brake fluid on a clutch?

    Part of a video titled Car Maintenance : How to Replace Clutch Fluid - YouTube
    0:00
    0:58
    This is the clutch fluid reservoir to fill it up you simply take the cap. Off. Either take dot threeMoreThis is the clutch fluid reservoir to fill it up you simply take the cap. Off. Either take dot three or dot 4 brake fluid depending on manufacturer specifications.
  • How do you fix a soft clutch pedal?

    Part of a video titled How to fix a soft clutch pedal | Car maintenance - YouTube
    0:08
    9:07
    Pretty easy there's just two bolts there on the outside. One on the top. Right up there and thenMorePretty easy there's just two bolts there on the outside. One on the top. Right up there and then there's one on the bottom. You didn't have to unscrew.
  • Can you use hydraulic oil for brake fluid?

    Hydraulic oil could possibly damage the master cylinder or the slave. and it is not compatible with brake fluid.22 Sept 2015
  • Can I mix different brand brake fluid?

    Since DOT 4 and 5.1 are both glycol-based brake fluids they are compatible with each other, which means they can be readily mixed without harming your brake system. It is important never to mistake DOT 5.1 (glycol-based) with DOT 5 which is silicone-based and should never be mixed with any other DOT fluid.4 Aug 2021
  • What happens when brake fluid is too full?

    If the master cylinder is overfilled it will not allow enough room for the brake fluid to expand due to heat expansion. The expanding fluid will cause the calipers to apply creating a residual drag.19 Jul 2016

Used Cars For Sale

View More