includes Bi-xenon headlamps with washers, 16-inch wheels wrapped in 195/50 profile rubbers, sports seats, stainless
This package includes LED room lamps, a trunk tray with anti-slip surface, and stainless steel kick plates
so responsive low end torque Modified cars tend to have more things to maintain Not so well-done-up
They added a touch of class to the already mature-looking RV-gen HR-V but if you wanted something sportier
and despite having a low average paint thickness of 88.9 μm, every panel has a consistent finish
Kia has opened bookings for the Kia EV6 First Edition in the US with 1,500 units up for grabs.
Proton has filed for several new trademarks.The trademarks that Proton has filed for include “iN-Touch
Theres another trashed up Kancil back on the streets and it is owned by the same man.
Touch ‘n Go has reiterated yet again that it will soon remove all parking surcharges.
updated for 2020.Both the Alphard’s and Vellfire’s list of safety features have been bumped up
Although the suede/leather combo feels pleasant to the touch. 2020 Mazda 2 1.5 Hatchback - Noise
two variants available, over 85% units of booking were for the V variant, while the E variant made up
Base model cars with steel wheels and unpainted bumpers are pretty much a thing of the past in Malaysia
donielleWe’ve all been there, squeezing through a tighter-than-usual spot in a car park and ending up
topping RS variant, which is limited to just three colour options – Platinum White Pearl, Modern Steel
Perodua has successfully held its first-ever Body & Paint (B&P) Skill Contest in a move to step
Ultra-rare parts and handbuilt finesseThis Mugen R boasts upgraded camshafts, stainless steel exhaust
HKS Thailand operations have come up with the Legal muffler series for the Corolla Cross.
But now Mercedes-Benz Malaysia (MBM) is adding a new engine to the line-up in the form of the Mercedes-Benz
affected body panel into shape, it’s not recommended.Modern vehicles are made out of high-tensile steel
Other AMG bits include the three-spoke steering wheel, AMG brushed stainless steel pedals, door sill
19 - 25 October 2019 Fuel price update: RON 97 up by 1 cent Monday PLUS highway celebrates successful
Proton Saga armoured up a new infotainment system in the mid-life facelift.
For the first time, there will be a proper 320 PS Tiguan R in the line-up too.The front end is completely
Once in a while, something really hot pops up in the used car markets that we just cant ignore.
features unique for the Malaysian market.The Rocky/Raizes unpainted tailgateOne such feature is its steel
side visor fins, side skirts and a rear spoiler.You can further add on air intakes on the bumpers, 4 stainless
The 2020 Isuzu D-Max has always been known for being a robust and reliable pick-up truck.
More Honda cars on the road translates to higher Body and Paint (BP) service intakes.As of October 2019
all-black 19-inch wheels.But the skirts arent the only things coming in pairs - check out the shiny, stainless-steel
People often ask me: "Where do you drive your DeLorean?" Sometimes I get the groceries in it! Love that car.
PORC-A-FIX High Heat Porcelain Touch Up Aluminum / Stainless Steel 71825 paint
HVLP SPRAY GUN SET – Auto Paint Primer Topcoat Touch-Up: HVLP Spray Guns with Stainless Steel Needle and Nozzle Se... http://bit.ly/diWyDI
lg electronics #lgus Black Stainless Steel refrigerator on market more than a year...scratch on new fridge...cannot find touch up paint!?
Check out some awesome Holmes Approved kitchens:
Speaking of kitchens, the “black stainless steel” is PEELING OFF my 14 month Samsung $200 oven and $600 microwave - not covered by extended warranty - Samsung gave me # to call for touch up paint #SAMSUNGSUCKS@Samsung @SamsungSupport
@LGCanada I have a scratch on my brand new (<24hrs in the house) LG thinQ black stainless steel fridge. Can you recommend a touch up paint? #devestated
@Matthew_Reilly that is insane. Guessing there's no touch up paint for stainless steel?
Used- MABE 32″stove: Stainless steel top and white body All 5 burners and Oven working Needs touch-up to paint J... http://bit.ly/NWjAZV
Ceramifix .5 oz Stainless Steel Touch up Paint for Tile, Appliances and More | Appliance Paint Stainless …
I like wide, dark spaces. If I had an option, my entire house would be painted in varying shades of grey and black. The interior design choices are not at all what I like, but can serve as a colour palette. I would prefer a private bathroom only accessible through a door in the room, as I hate being woken at 3:30 because my brother decided he wanted to get up and piss. As for the bed, more dark colours. Perfect. I want empty wall space so I can hang my flags and my racks, which currently hold two air rifles, a fishing pole with tackle, and a hockey stick. I also have an extensive personal library, with special emphasis on military history, Shakespeare, and Tom Clancy. With this in mind, I need floor-to-ceiling bookshelves, preferably stainless steel with wooden/black accents. Those are nice, but I would touch up the paint to be jet-black and pristine. I would also like a peg rack, to hang my keys, hat, jacket, and belt. Optimally, this would be situated next to the door, so I can’t forget anything. If the adjoining private bathroom is not an option, I would like a personal care station, most likely an armoire with a mirror mounted to the wall behind it. I need somewhere for my Old Spice, after all. A small liquor cabinet would be sufficient, if possible chilled, with a capacity to hold small snack items like cheese (of course painted to match the interior decor). Since I am an active gamer, I would ask that a part of the room be devoted to my consoles and a 45-inch monitor with a pull-out keyboard. Yeah, repaint that and move it to the side. Also, only dark red lights in my room other than the main light fixture. I like the eerie atmosphere they create, with the added bonus of not destroying your night vision. Speaking of which, a walk-in vault to store my valuable military surplus, like my milspec NODS. Close, but with a red light, and more full. That’s really all there is to my dream room. As always, all images from Google Image Search.
You might try an appliance polish like this one: ,Page on pcappliancerepair.com, Which will add a protective wax coating on the exterior of your refrigerator. You want to keep the rust from spreading. You can try a paint to cover up the rust or even an appliance cover which are designed to cover the exterior of your appliance. Search for "appliance covers" on the web. If the rust spots are small enough, you can use appliance touch up paint or if you have stainless steel, a product like this one to remove scratches: ,Page on pcappliancerepair.com
“Is it worth it to do X instead of Y on a renovation?” in the context of house flipping is almost always relative. What are the comps telling you to do? That is the absolute safest and best way to figure it out. Sure, you could segment the remodel based on income-levels of neighborhoods, but that doesn’t always work. Why? Sometimes it pays to be a value leader ,and put in better quality finishes than your competition to attract a quicker sale, price premium or both. Sometimes, you need to be a cost leader, and undercut the competition to get a quick sale. The ONLY way to know which strategy will work best is to see what other properties your potential buyers are looking at and how you can make yours better. Do this either with a lower price or more attractive product. “Market temperature” plays a role too. Speaking to this, there are two main rehab strategies out there. I’ll include some examples from actual flips i’ve done very recently. Simple Cosmetic Rehabs:, keep the existing flooring, maybe changing out appliances, cleaning up the interior/exterior and doing a paint job. Here’s an example. All that was done was a simple clean-out and re-paint. The market was HOT. In this case, I knew i’d be better off keeping my expenses minimal and offering a cheaper house. This one got snagged less than 7 days on the market. Full Gut Rehabs: ,Putting in all new everything. Kitchens, floors, bathrooms, paint, etc. Example (below): This house here was in a lower/middle income neighborhood. Nothing in it salvageable (I knew I was going to need to upgrade everything) I put granite, stainless steel appliances, tile flooring, good quality finishes and new everything while staying within budget. The price differential to go cheap here would never make up for the value i’d lose at resale. Result: Sold higher and faster than any comp in the neighborhood. **Key Point ** Your strategy should be factored in before you pull the trigger to buy that house. Choose which strategy by knowing what’s expected by your buyers. If three properties in the neighborhood sold for $185,000 and had brand new granite kitchens, new floors and paint, you better believe I am going to have to do the same or better to be competitive. If I buy the house cheap enough and assuming it’s interior components and finishes are salvageable, it may be better to do a simple cosmetic rehab and undercut the competitor’s houses and still profit. I’ve done both with success. My flip properties are mainly in lower/lower-middle income neighborhoods. Even in these neighborhoods I almost always go with modern, good quality finishes. Especially if I am doing a full-gut anyway. Why? If I have to undertake the time, effort, and money to fully gut out a house to bring it to standard, it makes no sense putting in lower-quality finishes., The point of the full-gut would be to add value to the house upon completion. If I put lower quality looking materials, I’d have been better off leaving the house “as-is” or doing some minor touch ups and selling at a lower price. The price difference between good quality and great looking finishes vs cheap finishes aren’t as big as you’d think but they make a huge difference on resale. ,Example: There are great tile flooring options under and around $1.00/sf. Why would you go with linoleum glue down vinyl to save $0.50/sf? (remember, that stuff is expensive to install). If you have to spend, you’re better off spending on things that hook your buyer. ,If you’ve gotta change out a kitchen anyway, why go with used cabinets you can find on craigslist or outdated styles marginally cheaper than the ones you’d buy at Lowe’s or HD? Lower quality finishes will show in the end. Believe me. Granite finishes and some pretty looking light fixtures are things I’ve found really hook a buyer, and if you’ve gotta change those items anyway, the price differential isn’t that big but gives you an edge come time for resale. In sum, you have to see what else is out there and craft your remodel strategy accordingly. Don’t go with the lowest quality finishes, but not the highest quality either. Go with something in the middle. Do what looks good at a reasonable price. Watch what’s trendy but don’t follow it to the book as a lot of places never catch up to the newest trends HGTV puts out there. Most importantly, gauge what your potential buyers want by following the comps closely. They are your truest and best friend when flipping houses. Hope this helps and best of luck to you! -Andrew J. Matella
Do home buyers really expect a perfect house like in House Hunters? I'm thinking of selling my house and now feel hopeless. The bad news is: Yes. Many home buyers expect perfect houses. And, no, it wasn’t always that way. A few decades ago, you could “get by” with a house in good condition that perhaps needed a few thousand dollars of paint, carpet, and other touch-ups. And you could even sell a house that needed more work—but was within the scope of many people’s skills and budgets—as a “handyman special.” Now, in most cases, the house has to be in pristine condition. Beyond that, even first-time home buyers expect stainless steel and granite countertops. They also expect a master bedroom large enough to handle their king-size bed. It’s hard to tell whether all those home buyers have been watching the reality TV shows and now believe that’s the norm, or whether the reality TV shows are just reflecting the way things are. (I suspect it’s the former, not the latter.) Get a good real estate agent who knows your area well, as well as what buyers of your type of property are looking for. Then follow his or her suggestions as closely as you can. It’s not hopeless. The real estate market is still strong in most areas. But things are very different from the days you (and I) remember.
The original Ford T-Bird comes to mind, as does the original Corvette. After 1957 Ford gave up on innovating the Bird. Corvette has continued to improve the breed with the culmination being the C8, the long-awaited mid-engined Vette. Let’s talk about some unique cars that didn’t do quite as well: Tucker. Preston Tucker was quite the entrepreneur in his day. A successful car sales career eventually led him to believe he could produce a radically different automobile. He certainly did: the 1948 Tucker Torpedo. His Tucker was rear engined, sported a padded dash as well as other innovations that would become standard in future cars. Tucker’s lack of business acumen resulted in Tucker Automobiles being closed a year after opening due to stock fraud allegations. A total of 51 cars were built, with 47 still in existence. Tucker passed from lung cancer in 1956. 1957: Edsel (I’m sure even the youngsters probably have heard about this one.) What if Ford made a car that hardly anyone bought. The Edsel was designed to erode the market share of Chevy and Chrysler, but did not. It was hyped by Madison Avenue for a year prior to its introduction and was sold for three years but never caught on. Ford lost $250 million on the Edsel. The equivalent of over two billion in 2020. 1960: Chevrolet Corvair. Chevy’s nod to VW/Porsche, with its rear mounted aircooled engine. Innovative, but the swing rear axle ultimately proved to be the demise of the buzzy little sedan while promoting the career of Ralph Nader. 1971: Chevrolet Vega. A new compact design that promised to change the industry. John DeLorean, later founder of DeLorean Motor Co., was head of Chevrolet Division and touted the Vega heavily. Somehow, the Vega made it six years before stopping production in 1977. The Vega suffered engine and other reliability problems, as well as rust issues. 1975: DeLorean Motor Company. Founded by John DeLorean (See Above) The DeLorean, crafted from stainless steel, was considered quite revolutionary. No touch up paint needed; just a little steel wool to buff out those occasional scratches. His mid engine design preceded the Pontiac Fiero by several years, but ultimately DeLorean failed and the company later went into receivership in 1982.
I can report on what my mother and her people did. They were German Mennonites living near Zaporizhia, Ukraine on the beautiful Dnieper River. They had emigrated there from Prussia in the early 1800s at the invitation of Catherine the Great. All through the 19th century they had done very well, founding new towns, buying more land, and then starting industrial businesses. My great-grandfather introduced the stainless steel plow to Ukraine and had the first car in Zaporizhia. They lost all that in the Revolution. Many of them were killed in the turmoil, and their property was seized. They were thrown back on their educations. My grandfather, Leonhard Unger, was an engineer, and designed and built the first native tractor in the Ukraine in the 1920s. He managed a local factory and taught at the local technical school. Then the purges began in the 1930s. He was arrested in 1933 and sent to work on the Trans-Siberian Railway in the far east. My grandmother took my mother (then age 6) off to Siberia to be with him. It was a camp in the woods, and no place for women and children. Here they are in 1934, the last time they saw him: Note the painted backdrop with bare planks on the floor. They returned to Zaporizhia, where my grandmother was a teacher. Then the War came in 1941. The Germans swept across Ukraine, and took Zaporizhia. They retreated in 1944, and took all the Mennonites with them. Some made it to the Allied Zone, but many were caught in the Soviet occupation. They were sent off to gulags. My mother wound up in Bremen Germany, where she became a nurse after the War. When her mother died in 1949, she emigrated to Canada, where the Mennonite Central Committee had brought a lot of their brethren out of Europe. She met my father there and had all of us. The ones who were sent East were freed from the camps after Stalin’s death in 1952. My mother went back to the Soviet Union in 1973 to see her old home. She managed to connect with one them, her cousin Netje Martens, in Novosibirsk. Let me tell her story from my mother’s memoir ,“In the Arms of the River”,: Here is their story. I tell it because it happened to so many of us. All the “repatriated” ethnic Germans forced to go back to the Soviet Union after the war were sent to Siberia. There they were given the worst jobs. Some went to the mines. Some were given dull axes to cut down the taiga. Netje and her sister chopped trees for ten years. In 1956 Krushchev pardoned many such prisoners. Each was given 25 rubles and told to leave the camp. They were free to go anywhere except for their homes back in Ukraine. Twelve young people from the logging camp went to the train station and asked the station master where they could go for 25 rubles. He looked at a map but could only offer three suggestions, all remote specks in Siberia. They picked one of these, a dot along the river Ob. Netje told me, “It made sense because we are river people. Just as our forefathers picked a spot on the Dnieper, so now we chose the Ob. When we got there, we built a raft and set out to find the right place to settle.” “What did you do first when you found your spot?” I asked. “We unloaded our things and prepared a meal. Our appointed leader, Peter Kroeker, read a Bible passage, and then we all got married.” “Just like that?” “Well, not just like that. We had planned this before we left the camp. It was not romantic in the usual sense. In the Gulag it was not moonlight and roses. None of us were handsome or pretty, but we were all willing to put our trials and tribulations behind us and make a decent life. Our husbands are good men. Too bad they are not from Einlage. I think our people knew how to have a good laugh, more so than the people from the other villages.” After these preliminaries, the next thing to do was to cut wood. “Boy, did we know how to do that,” laughed Netje’s sister. They built a log cabin for each couple. The Chukchis (natives of Siberia) brought them furs to line the walls. They fished and hunted and took their harvest down the river to trade for flour and sugar. Now, 17 years later, they had built a thriving settlement. They had a dairy farm with 40 cows and made butter and cheese. They had sheep for wool and were starting to make beautiful coats from fur and knitted wool. “How do you manage to do all that?” “It is not just the twelve of us anymore. Between us we have 21 children, and they are a big help now. Our school turned out to be a prime attraction for the Chukchi. They winter near us, and, in exchange for teaching their children, they help on the farm and bring us furs.” We talked far into the night. There was a knock on the door, and the hotel manager looked in and offered us tea. “You have not seen each other for 30 years! Stay as long as you like. I will hold the rooms,” he told us. This experience was typical. The further away we went from Moscow, the friendlier the people became. The next day my two friends had a surprise for me: tickets to the Novosibirsk Opera. I was touched and asked what I could do for them. “Just to see you after so long is the greatest gift you could have given us. We have everything we need. Most important, we are free. We live so far from anywhere that nobody bothers us. If somebody should set out to do us harm, we would hear about it long before they got to us. We would not sit and wait.” Yet they didn’t stay. When the Soviet Union fell in 1989, Germany offered citizenship to all the ethnic Germans there. Netje and the others returned to Germany. They were the last of the Mennonites in the Russian empire. My mother and all of her generation have now passed, so they have become a lost people.
Unlike SOME people, I will actually answer the freaking question. Option 1: Red is pretty good, but if he’s going to run for a second term, I would go for a baseball cap with red, white and blue stripes placed lengthwise, much in the same way a racing hat would have lengthwise racing stripes. On top of these stripes, I would have “Make America Great Again”, or just “MAGA” (or whatever slogan Trump was using at that moment) placed on top of the stripes, but with the letters being the opposite color to whatever color they were covering up, creating an eye-catching contrast in color. Even better if I can get some stars along the brim of the hat for extra patriotism. Option 2: This would be a navy blue hat with a metal “T” on the front, made from real metal (likely gold-painted stainless steel), effectively being Trump Tower but in hat form (and with “MAGA” underneath it in silver lettering). There would also be a small LED base right underneath the “T”, so that you could turn it on at night and have a nice, reflective look to it. Option 3: An Ushanka with a red soviet star on it, and the words “сделать Америку великой снова” (“Make America Great Again” in Russian), also written in red. This would be to troll the “Russian Collusion” crowd. Option 3.5: A German Gestapo-type hat (I don’t know what it’s called). In subtle lettering, it would say “Make America Great Again” in German. ,(“Mach Amerika wieder großartig”) Obviously this would be the hat used to troll the “Trump is literally Hitler” crowd. When the Germans meet the Russians, it would be awesome if they shouted “COMRADE!” and embraced one another, goose stepping down the street to the latest Trump rally. The finishing touch for the “German” outfit would be a long trenchcoat with a Nazi-esque Trump “T” on the arms.
How about getting a run in the paint on your car? How about screwing up with your touch up gun. Getting splatter when you're almost done? How about losing a USB flash drive with 1,000 hours of AutoCAD files on it? How about not getting a printer to work right after working all night. How about going out to a project & finding out that all the hardware on all the doors are brass because you forgot to change it to stainless steel? Actually not all this happened to me, but close. None of that compares to going to the airport to pick up your son. He's not there because he committed suicide.
Fresh Paint. Still the cheapest upgrade. I use “good" paint, that is highly rated in the clean up, scrubbable category. Never flat, except for ceilings. Same paint used across properties. Eliminates guess work. Unless! I find good deals, high quality paint, in the returns section. Ask your paint counter person to keep a look out. A Rigorous cleaning. I don't know how many bathtubs, fiberglass or porcelain, that don't look better with a quality buffing with the appropriate compound. Sinks. Porcelain or stainless. Baking soda paste scrub. Upgraded to good LED lighting…lighting saves me money in the not too long term as well. And, they last a long, long time. Hate packing a ladder to replace hard to reach bulbs? And, want to put your property in the best light? LEDs. I put some vintage looking LED bulbs in a older bathroom's mirrored vanity area. Appliances. I clean them, but, yet they still look…so worn. Wow. Now, I do this routinely. Cleaning, buffing compound. NuFinish. So, I buffed out a glass countertop stove just for S&G's. It looked really bad. This worked too. Touch up, no need for appliance paint. Black nail polish works really well on black appliances. Stainless Steel, and White appliance paint is saved for major makeovers. Wow. The Stainless steel paint is amazing. I keep a gloss, and a matte nail polish handy. Chips on appliances, countertops super glue filler, nail polish. Granite colored, black…it actually wasn't too hard to get a very decent match. I use the same “color restore” products, and Nu Finish typically used on my car. Marble. Old, worn? Cleaned. Resealed, with marble sealant. Allowed to dry. Buffed with rubbing compound. Clean up the dust. NuFinish. Wow! Amazing, shining, water beading, like new countertops. The cook top…once cleaned, and buffed with cheap baking soda paste… Got the same Nu Finish sealing. (The amazing part, is how any one could stand cooking on a 1/8th inch of baked on crud... and, not set off the smoke detectors.) Good as, well, not new, but it looks really good, 99% of crud removed. Cleaning, should definitely include the windows. New caulk. Clean the grout. Seal. Use that buffer again on the tile in the bathroom. (Grout whitening. Cleaning. Non slippery grout sealer) Sealed grout once cleaned…I used the same sealer, I used on the marble, and granite. Saves me from regrouting, and from easy staining. Formica countertop chips. There is a nail polish for those too. I have taken to shopping at a store that is like a Goodwill of Reclaimed Building materials. Many products are donated, new, but in damaged packaging. Good stuff. Inexpensive, and often way better materials than the original. Building that equity in the process with inexpensive, and yet, not cheap particle board… upgrades. Solid. Sturdy. Vintage wood. I mostly use the same bucket, I use on the weekends for the cars. Throw in touch up nail polish. Baking soda. Extra grades, coarse through polishing, of reusable buffing pads. Curb appeal. Degrease driveway. Power spray deep clean drive, and walks. Quickly, re- black the blacktop. Weed. Check for perennial plants, year end clearance. Often, free or greatly reduced. Put a nice sign in the yard. For Rent. An extra $50.00+/mo. It looks “worth" it, clean, shiny, refurbished. Low maintenance. Smells good. Well lit. A new shower curtain. Welcome Home! After the second or third month, $50 additional profit, and a lot less work for me in 6 months to a year.
Evening rounds on the ward. I get signout from the off-going trauma surgeon, and after scribbling some notes across my patient list, fold it into my back pocket and take the elevator to the fourth floor. “Knock-knock!” I call out from the half-opened door, and then, “Bright light, shield your eyes” as I flip the switch. But she is already huddled, blanket over her head, in the dark far corner of the room. I approach gingerly. “Can we talk?” “No!” She hikes the blanket farther up and tucks it firmly behind her head. I touch her shoulder. “How are you doing, I mean… with everything?” She doesn’t come out. “Horrible,” and a hiccuped sob, come the reply. “It can be tough, I know—” I begin, and now the blanket is whipped back. A swollen, tear-stained face glares back at me from the shadows within. “How do you know?!” She cries out. “How could you ever possibly know?!!” “I know,” I say simply, and leaning down rap my knuckles firmly on my right calf. A hollow knocking sound seems to echo in the stillness of the room. She sits up. She leans forward. Mouth open, she reaches for the leg of my scrubs and pulls them up, revealing a stainless steel ankle. My calf is lime-green zebra-striped plastic, with a puffy-painted, bedazzled, glow-in-the-dark orange-and-purple Mickey Mouse head gleaming from the side. She runs a finger over it. I smile. “I gave myself a tattoo,” I explain. Now she is visibly excited. “Let me see you walk!” She demands, and I comply, strutting the catwalk to the door, pirouetting and returning. She marvels, sniffs, and looks deep into my face. “I’m pregnant,” she volunteers softly, the question implied. “I know.” I connect with her gaze. “It’s okay. I am too.” She lies back in bed, a look of relief falling across her face. With one hand she gently grasps the hem of my pants leg and pulls it back down. “Thank you.” I turn off the light, and pull the door to. Thank YOU.