1. If your car produce bluish smoke during start up, it could be your car is burning engine oil. It normally cause by the failed oil seal. A failed oil seal enable the engine oil flow into cylinder via the valve clearance under the effect of gravity. Once the engine is started, the engine oil and air mixtures will burn together under high temperature, producing a huge amount of bluish smoke. Suggest to diagnose the injector at work shop.
2. If you notice your car via the rear view mirror that it produce huge amount of blueish smoke when you press the gas pedal during drive or idling, it tells the engine is burning engine oil. Pressing the gas pedal aggressively during drive or idling is to check if the seal between the piston ring and cylinder wall is tight enough. If the seal is not tight enough, piston ring movement frequency increases when the car in sudden acceleration, the engine oil left on the cylinder wall will be bring into the combustion chamber by the piston ring easily which produce bluish smoke when it burns. Suggest to diagnose at the workshop.
Suggest to proceed to workshop for repair, usually the keypoints of diagnose are:
1. Perform a detail check to the engine. If there are excessive amount of engine oil, pump it out. Meanwhile, owner are advise not to top up engine oil on their own, if necessary to do so, must take note on the top up amount. Engine oil level should stay within the high and low marking on the measuring stick.
2. Repair the engine based on the faulty level. If the damage is severe then owner need to prepare for a major repair. Suggest owner to use high quality fuel in daily usage, periodicaly check on the air filter and replace if necessary.