How does Perodua Myvi's Advanced Security Assistance (ASA) work?

When the third-generation Perodua Myvi hatchback was unveiled, its Advanced Security Assistant (ASA) became a heated topic. Pre-crash Warning (PCW), pre-crash brake (PCB), front exit alarm (FDA) and pedal misoperation control (PMC) are all at the price of RM55K.

The operating speed of PCB and PCW can reach 4 to 30 km/h, suitable for commuter use. With a stereo camera, the system scans frontal objects and makes an audible warning to the driver when an impending collision is detected. If the driver is not operating the car (steering or braking), or when the speed difference is below 20 km/h compared to the front vehicle, the vehicle will automatically force the brakes to stop immediately. If the relative speed difference is between 20-30 km/h, the system could only help to alleviate the severity of danger rather than completely shun the collision.

In addition, the PCB can be activated three times per engine start. YES, ONLY THREE TIMES! This means that if the PCB has been activated on three different occasions or three times under the same occasion during your trip, the system will not be frozen up. Nevertheless, you can always wake the PCB up by restarting the engine and reset the counter to 3.