Enter your car, close all of its doors, open the driver's side window and place a key in the ignition.
Turn the key two clicks to the right to turn the car to the "On" position.
Press the lock button on the driver's side door to lock the doors.
Data Sources:
*
All content is shared, and reprinted from the Internet. If there is any infringement or error, please contact us to delete it. Email: feedback@wapcar.com
Make sure you have your vehicle code. You can find it under the scratch-off plastic tag attached to the key fob. Open the tag and scratch off the top to uncover the 10-digit Vehicle Code. *Note: the vehicle code is case sensitive so ensure that appropriate characters have been capitalized as needed.
Turn it over and look for this Chrome button press the button while pulling on the keyring end andMoreTurn it over and look for this Chrome button press the button while pulling on the keyring end and you have the mechanical key as noted the keyhole is visible at the rear of the driver's door handle.
To disable the keyless entry system in Your Audi just take the actual key out of the remote (key fob) and leave the remote inside the car.Lock the car manually with the key. It will then disable the keyless entry.
Take the key out and try it here we go you'll just hear the car lock unlock lock again and you'llMoreTake the key out and try it here we go you'll just hear the car lock unlock lock again and you'll hear a beep. That is how you reprogram. The key fob on an Audi TT.